The Importance of Progressive Overload

Once again I welcome Rachel Cosgrove to the site. Check out what Rachel has to say about progressive overload in this guest blog. If you like this then you will love taking a look around Rachel’s website and make sure you check out her new book…

I woke up the other day and found this email waiting in my inbox:

"Rachel, I’m scared of doing heavy lifts in the gym because my knees hurt and buckle when I squat. I do some of the movement, but I’m scared to do the whole range of motion for fear of inflaming them further.

Any tips on how to bypass this knee pain? It’s the sudden buckling that worries me. I don’t want to collapse with a hundred pounds on my shoulders. Help!"

Yikes! This poor girl should not have a hundred pounds on her shoulders to begin with! She never should’ve progressed up to that weight if her knees are buckling and there’s significant pain.

This email served as a huge wake-up call that told me an article was needed, addressing how to progress your loads, when to progress your loads, and why you need to progress your loads. deadlift

This article’s for you, little deadlift girl, wherever you are.

So You’ve Answered the Call to Strength

I believe that most women don’t push themselves in the gym as much as they could. However, lifting heavy weight needs to be a gradual, progressive process. If you’ve read any of my recent articles, you’ve (hopefully) decided that you want to start lifting heavier in the gym to improve your results.

You’re no longer scared of lifting heavy but, understandably, you don’t want to hurt yourself. So just how exactly do you get from point A to point B?

#1) Start with Bodyweight Exercises

If you can’t perform an exercise, any exercise, with good form, in the full range of motion, using only your bodyweight — no external resistance like dumbbells, barbells, or cables — then you should absolutely not be adding any weight!

If you feel pain somewhere in the range of motion, notice your body buckling, or if you simply don’t have the strength to perform the exercise properly, with just your bodyweight, do not start adding an outside load. stretch

Never, I repeat, never sacrifice your technique or range of motion just to increase the load. Adding an outside load is only necessary when your body needs a new demand because your bodyweight, with full range of motion, has become too easy.

You have to put a demand on your body, let it adapt, and then progress slowly. The key is to keep progressing, but in small increments. You can’t just throw a bunch of weight on the bar and start squatting if you have never done a bodyweight squat with good form.

Don’t increase your loads by more than 10% a week, and remember to start small. For example, going from zero outside load to 20 pounds is a significant jump (depending on the exercise).

The Rule: Start with just bodyweight through the full range of motion, and go from there.

#2) Build a Solid Foundation First

Before increasing your loads in any particular exercises, you need to build a solid foundation of general physical qualities. At our gym, we call it our "corrective exercise phase," where we build a base of strength and address any specific weaknesses using standard movements, including bodyweight exercises such as squats, push-ups, and lunges.

When in doubt, stick to the basics for a longer period of time rather than shorter. The longer you stick to the basics, the better your foundation will be. Even if you’ve been training for a while, it’s always a good idea to occasionally go back to basics.

Can you use both legs to lunge with good form and without pain? Can you do a bent-over row with the same amount you can bench press? Can you perform an overhead squat with good form? stretch

Going back to these basic exercises and starting with a solid foundation will allow you to eventually take your training to even higher levels, and you’ll be more likely to reach your full potential.

The Rule: If you’re not pain-free during basic movements like squatting, lunging, bending, twisting, pushing, and pulling you should not be adding outside load.

#3) Progressive Overload – The Key to Results

What would happen if you did the exact same workout, over and over and over, for a year? How long would it take before you stopped progressing?

This is why loads must increase — to allow for continued physiological adaptations and changes (that means results, plain and simple.)

After every workout, your body should recover and be stronger for your next workout. You should never lift the same loads twice in a row. If you’re recovering properly, every single workout have you lifting more weight that last time, even if it’s just one pound more. deadlift

One pound today could be half a truck tomorrow.

However, don’t try to increase every single exercise in one workout. Each increase will affect the exercises that follow in that day’s training. Limit yourself to only increase one to three exercises each session. Next time you do the program, pick three different exercises to increase.

The Rule: As you start to increase the loads, maintain proper form and complete range of motion. If you have to reduce your range of motion, sacrifice your technique, or have any pain, regress the exercise, decrease the load, and don’t continue.

Get those three rules down first. They’re crucial! Use your bodyweight with good form, build a solid foundation, and then you’ll be ready to start progressing your loads. But remember, progressing an exercise doesn’t always have to mean adding weight.

There are a number of ways to progress and all of them will challenge you and make you stronger and change your body.

6 Methods of Progress

1 — Single Progression

Single progression means that you keep the reps the same but increase the weight. Most gyms force you to jump by at least 5 pounds on most exercises. This may not always be appropriate.

• 5-pounds is only a 1% increase for a 500-pound squat. • 5-pounds is a 2.5% increase for a 200-pound squat. • 5-pounds is a 5% increase for a 100-pound squat. • But on a military press or chest press, for example, a 5-pound increase going from 25 to 30 is 20%!

If your gym has smaller weights (dumbbells or barbell plates), using micro-loading can be safer and more effective. Micro-loading means increasing your loads by smaller increments than the standard 5-pound jumps. This is usually done with small magnets or tiny 1/2-pound plates.

You shouldn’t increase your load by more than 10% each week on any given exercise.

2 — Double Progression

Double progression refers to increasing the weight and the reps. For example, your program might call for sets of 8-12 reps. During week one, use a weight that allows at least 8 reps. Attempt to add reps to each set at each new workout.

Once you achieve 12 reps on each set, increase the load 3-5% and repeat the process. This method works really well with dumbbell exercises and chin-ups. Keep in mind that adding a rep is like adding 2-3% weight.

So if you increase the load 5% and you add a few extra reps, you can easily get up to a 10% increase. But the rule from above still applies: we don’t want to increase by more than 10% a week.

3 — Volume Increases

Increasing the volume of the workout, or the amount of "work" you get done, is another way to progress. This is easiest to do by adding more sets. I usually recommend performing 1-2 sets in week one and then progressing to 2-4 sets, depending on the type program and the goals. figure athlete

A little extra work always pays off.

4 — Use a Progressive Range of Motion

Another great way to progress an exercise is by increasing the range of motion. Instead of increasing the amount of weight you’re lifting with the deadlift, for example, use smaller plates (25s or 35s instead of 45s). Similarly, you could stand on a box or sturdy step to increase your range of motion.

5 — Get Unstable

Instead of adding load, sets, or reps, you can incorporate an unstable surface such as a balance board, Valslide, or Swiss ball. Depending on the exercise, you can stand, sit, or lie down on any of those tools and increase the difficulty of the movement. figure athlete

6 — Changing the Center of Gravity

Standing on one foot instead of two feet, or standing with your feet closer together, are also ways of progressing an exercise. For example, doing push-ups with your feet placed wider is easier than placing one foot on top of the other.

Making It All Work

As an example of putting all this info together, at our gym, we progress our clients through our programs with the following strategy:

Week 1: Intro week

We emphasize proper technique, review the exercises, or introduce a new movement. We start with lowered volume (de-load) using 1-2 sets instead of 3. We start with about a two-rep buffer or two reps "left in the bank". So, for a set of 10, we’d use a weight we know we could get 12 with.

Week 2: Base week

We increase the volume (usually by adding a third set) and increase the load if possible (depends on difficultly of week 1 and their experience with the movement). The load should be at a previous best level (for an experienced client) or use one-rep buffer/one rep in bank, if less experienced.

Week 3: Overload week (PR week)

Increase the load and go for maximal efforts for the rep goals — but don’t miss any reps.

Week 4: Shock week

Go for broke. Increase load and have another week of chasing PR’s. Missed reps may occur, but they’re certainly not a goal. Minimize technical breakdown, and maintain form as best as possible under such heavy load.

You can’t lift heavy every workout for 52 weeks a year. Using a system like the one above, where each time you start a new program (every four weeks) you have a deload week, will allow you to build slowly and progress your strength. After week four, we usually start a new program, beginning at week one and deload again.

Two Tricky Monsters

The two exercises to be most cautious of as you increase your loads are the deadlift and the squat. Progress these two movements very carefully and very slowly.

The following criteria must be met for every rep, in every set, no exceptions, in order to call it a safe squat or deadlift. If you’re unable to perform the movement while keeping the following form, you need to decrease the load and work on the movement itself.

 

• Keep your back in extension; you should have no lumbar flexion (lower back shouldn’t curve forwards). • The bar should be directly vertical to middle of the foot. • Your knees should track directly over your toes. • Your feet need to stay completely flat on the ground. • Your hips and shoulders should rise at approximately the same rate on the ascent. Your hips shouldn’t come up first. deadlift

Wrap-up

Be patient with your progress, because building strength takes time. Every workout, every rep, and every set really gets you closer to where you want to be. The key is to continually challenge yourself, so you can progress steadily and safely.

***********************************************************************************************************************************************

About the Author

Rachel Cosgrove is a fitness professional who specializes in getting women of all ages into the best shape of their lives. She owns and operates Results Fitness with her husband in Santa Clarita, Ca. She has a BS in Exercises Physiology and earned her CSCS from the National Strength and Conditioning Association. She has competed in fitness competitions, triathlons and powerlifting. She has also been featured in Women’s Health Magazine, Muscle and Fitness Hers, Shape Magazine, Fitness Magazine, Men’s Health, Men’s Fitness and Oxygen.

You can pick up a copy of her fantastic new book in time for Christmas!

 

Please check out academic essays online our virtual bulletin board
Nick GranthamThe Importance of Progressive Overload

Leave a Reply

Your email address will not be published. Required fields are marked *